Ford Focus ST-3 - Ben Norman
Entered for the June 2011 competition.
Enter Competition | Back to Entries
 |
Name: Ben Norman
Make: Ford
Model: Focus ST-3
Year: 2009
Viewed: 6152 times.
Votes/Comments: 30
|
Send to a Friend
|
Products Used
How Ben Used Our Products
First step in the cleaning is a good rinse with the jet wash. Then using the wheel cleaner give the wheels their first going over.
The car then gets an all over shampoo, using the 2 bucket method, before another rinse. The wheels have their own wash mitt which is used to give them a good scrub inside and out. Every 3-6 months at this stage the car gets a going over with the clay kit while its still wet, no point in drying. Then another shampoo and rinse.
Dry using a micro fibre towel and once dry a going over with the quick detailer, using the swabs to get into the hard to reach places.
After this ensuring its in the shade it gets 2 coats of the Jet-Seal. once the second coat is buffed off it gets 2 coats of the black hole then 2 coats of the DoDo juice, all applied and buffed by hand. Then the tail pies and back box get a going over with AutoSol.
The interiour then gets a hoover and clean with the leather seats getting treated again every 3-6 months.
Report Abuse