Ford Focus st3 - Adam Ellen
Entered for the August 2011 competition.
Enter Competition | Back to Entries
Name: Adam Ellen
Model: Focus st3
Viewed: 2466 times.
Send to a Friend
How Adam Used Our Products
Pre-wash to remove any lose dirt and reduce chance or swirls / scratches.
Snow foam the car and leave for 5-10mins.
Rinse the snow foam with pressure washer.
Spray the bilberry wheel cleaner on the wheels leave for a few mins and then use Meg’s wheel brush to clean.
Wheels, I always clean wheels first to stop any chemicals staying on the body work.
Wash with 2 bucket method with grit guard, use one cloth for the top off car and one for the lower third of the car where most of the dirt is, this again reduces the chance of damaging paint.
Rinse the car again with pressure washer.
Don't bother to dry, go straight in with the clay as the water acts as lube so saves on the clay lube, keep turning the clay and if it becomes to contaminated bin it and use a new bit, and if you drop it again bin it.
I then go in with a da polisher if needed with a light grade polish, taping over any black trim to avoid damaging or discolouring it.
I then go in with a glaze like poor boys black hole to enhance the paint and colour, then it’s a good wax that’s needed I like dodo, used it for ages and know the result it produces.
I then go round and treated the trim if needed and also treat the tyres to make them look like new, then its the glass, I hate cleaning glass, but clean glass finishes the car off, then for me its a final once over with a quick detail to remove any wax iv missed and any dust that may have settled on the paint.