Lexus IS 250 - Gordon Ross
Entered for the April 2013 competition.
Enter Competition | Back to Entries
Name: Gordon Ross
Model: IS 250
Viewed: 2004 times.
Send to a Friend
How Gordon Used Our Products
Once the interior is complete, The car is jet washed, then washed with a two bucket system ( both have grit guards) one with Autoglym wash and the other with clean water, wash panel at a time with wash bucket then rinse lambswool in clean water before you put back into wash bucket, then onto next panel, repeat till finished, rinse, then I repeat process again with fresh water in clean buckets, open doors, boot & bonnet to drip dry while drying off with microfibre cloths, apply Collinite wax with damp micro fibre pad to one panel at a time, allowing to haze then buff with clean cloth , once complete I reapply another lighter coat of wax and buff.
The waxy cloth is used on side windows and alloys, then binned. The windows are buffed to finish, then finish off alloys, tyres are then sprayed with Autoglym tyre shine using a shield to protect paint from overspray.
I use two lambswool mitts (one in each hand) to finish off the paintwork for a final time.
It's also a good work out, and gives me some quiet time from the other half ... ooops!