Ford Fiesta - Ryan Goodyear
Entered for the October 2013 competition.
Enter Competition | Back to Entries
|
Name: Ryan Goodyear
Make: Ford
Model: Fiesta
Year: 2008
Viewed: 5416 times.
Votes/Comments: 11
|
Send to a Friend
|
Products Used
How Ryan Used Our Products
Firstly I spray my wheels with valet pro bilberry wheel cleaner, leave to dwell for 5 minutes, spray off with jet washer. I then spray the bottom half of the car along with the wheels with iron decontaminator and leave to dwell for 5 minutes along with tar remover, I then cover the car in AF avalanche snow foam and leave for 30 minutes and spray off, then using the TBM and lambs wool wash mitts with lather to wash the car, top half first then bottom and separate MIT for wheels, spray off top to bottom and clay the whole car, panel at a time, I then re-wash the car and rinse, using an hair dryer I try most off the car to stop any water catching while drying with a water magnet.
Once the car is fully dry and clean, I prep the car with 3m tape going onto machine polishing it in 3 steps, cutting with compound, polishing with p40 and then finishing with AF power seal. After paint correction is completed I them apply AF desire with my hands and leave to cure for 30 mins and buff off. One he paint work is done, I then move onto the wheels, sealing them with Poorboys and dressing tyres and plastics with Poorboys and satin.
The exhaust tips are then polished with Swissvax along with their glass polish. The car then has a final layer of paint sealant. Normally 10-15 hours if not longer
Report Abuse