Seat Leon Cupra R - Adam Watson - Winner March 2016
Entered for the March 2016 competition.
Enter Competition | Back to Entries
 |
Name: Adam Watson
Make: Seat
Model: Leon Cupra R
Year: 2006
Viewed: 5398 times.
Votes/Comments: 44
|
Send to a Friend
|
Products Used
How Adam Used Our Products
Firstly using my Karcher K4 jet wash I applied a prewash through my snow foam lance, allowed this to dwell then rinsed off.
After this I applied a thorough coating of snow foam, even inside the wheel arch's to loosen any built up grime. Whilst the snow foam was dwelling I applied Valet Pro Bilberry Wheel cleaner allowed this to soak into the grime and gave it a helping hand with a wheel specific soft bristled brush.
After the foam had dwelled I jet washed the foam off the car and the Bilberry off the wheels.
After this, I two bucket washed the car making sure all areas were washed thoroughly with my Gtechniq Wash Mitt.
The car was then rinsed down again, dried with my Woolly Mammoth drying towel, next I clayed the car with Auto Finesse Glide clay lube and clay.
After claying the car was then washed again to remove any leftovers from claying, then dried once again.
After this I panel wiped the whole car to clean off any old wax residue left over.
Then I went over the car by hand with Poorboys SSR2.5 to cut any light abrasions out, then a coat of EX-P Sealant and Autoglym HD wax to finish off.
Glass was cleaned, and tyres dressed with Meguiar’s Endurance High Gloss Tyre gel.
Report Abuse