Ford Mondeo 2.2 TDCI - David Bell
Entered for the May 2016 competition.
Enter Competition | Back to Entries
Name: David Bell
Model: Mondeo 2.2 TDCI
Viewed: 696 times.
Send to a Friend
How David Used Our Products
Firstly rinsed using a cold water pressure washer. Then a good soaking with snow foam and allowed to run off. 2 Bucket hand wash using microfibre mitt and dried off thoroughly with microfibre drying towels.
Poorboys white diamond applied by hand, with a glove to keep skin oils and dirt off the paint, much easier to apply this by hand than it is using an applicator. Allowed to start to haze over and buffed off with a clean microfibre before it dries onto the paintwork, makes it slightly easier to get it all off completely. Once the whole car is done its gone over with another clean towel to remove any residue.
On to waxing using Natty's Paste Wax, applied onto one panel at a time using a foam applicator and again allowed to just start to haze before buffing off with a clean microfibre.
Weather and time dependant I'll do 2 layers of wax for that extra shine and seal from the elements.
After the bodywork is done I'll do any trim and then tyres and alloys and then give the inside a quick vacuum :)