Kamikaze Collection Artificial Clearcoat – Finally, A Durable Solution For Ultra-Sensitive Paint Finishes?

Facebook
Facebook
Instagram
Pinterest
Pinterest
Google+
Google+
LinkedIn
RSS

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

Ceramic sealants are known for providing swirl resistance protection to automotive clearcoats and this is particularly useful for cars with sensitive finishes which mar easily. However, some clearcoats are so delicate they become blemished as the sealant is being applied. Japanese marques, particularly with dark coloured paintwork are notoriously difficult to refine and apply sealant protection to and typically these clearcoats have to be protected with a carnauba wax as an alternative. But while waxes produce a fabulous shine, they offer limited protection from industrial and environmental contaminants. In addition, they have reduced durability (compared to ceramic sealants), and render little in the way of resistance to harsh wash chemicals and swirls. However, Japanese car care manufacturer, Kamikaze Collection, may have a solution.

The ‘Artificial Clearcoat’ from Kamikaze Collection is a priming product specifically designed to fill the light scratches and holograms so tricky to remove from delicate clearcoats and leave a glossy, more swirl-resistant finish ready to receive a ceramic sealant coating.

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

It’s quite ingenious the way Kamikaze has gone about this. Artificial Clearcoat fills in the imperfections and adds 3-5 microns of a much tougher layer on the top of the existing paintwork. Rather than spending many hours partially removing the protective layers of clearcoat to eliminate imperfections, Artificial Clearcoat simply gives the illusion the blemishes having been removed. The finish is tough enough that you can then put a ceramic sealant coating over the top straightaway – there’s no curing time to it. – Derek Ginger, Master Detailer, UF Detailing Studio

One particular vehicle UF Detailing Studio has detailed on several previous occasions is a black Aston Martin DB4. Each visit to the studio has seen extensive paint correction being performed as the clearcoat marks even with the pressure of a microfibre. As attempts to apply various ceramic sealants have all resulted in marring the finish, the final protection product for this DB4, up until now has always been an exclusive carnauba wax.

This DB4 doesn’t get driven a great deal and certainly not when the weather is less than ideal, but even so, each time it returns to UF machine polishing is always required as the finish is so sensitive. We were excited by the prospect we might have found the solution to this marring issue and couldn’t wait to give it a try. – Derek Ginger, Master Detailer, UF Detailing Studio

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

The DB4 arrived at the studio and was initially treated with Valet Pro Dragon’s Breath to remove any ferrous contamination, which usually collects on the wheels and sills as a result of brake pads shredding when the brakes are applied. Dragon’s Breath shrinks the particles, causing them to break their bond with the substrate and allowing the contamination to be freely rinsed away. This type of product eliminates the need for scrubbing at the wheels paintwork in an attempt to remove the particles.

You can use a clay bar to remove ferrous contamination, however, the particles are usually quite sharp and have become imbedded. When using clay, you fold it regularly so you’re always presenting a fresh, clean section to the paintwork. Even so, with sensitive finishes you’re likely to mark the paint anyway, and with the finish on this DB4, a clay bar was out of the question. – Derek Ginger, Master Detailer, UF Detailing Studio

Once Dragon’s Breath had been rinsed away, the car was then degreased using Bilt-Hamber Surfex HD, before being treated with Valet Pro Citrus Tar & Glue Remover to dissolve sticky contamination such as tree sap or bug remains. Then, using a Kranzle-adapted Snow Foam Lance and Ultimate Snow Foam, the DB4 was pre-cleaned to remove any larger particles of dirt and grit. The foam was rinsed away before the DB4 was very carefully washed using the Two Bucket Method and UF Ulti-Mitt Double Sided Merino Wash Mitt. A separate UF Wheel Bucket with Scratch Shield and a selection of UF Wheel Woolies were also used to clean the intricate wire wheel design. After rinsing off the suds, an Aqua Gleam Deionising Water Filter was attached to the hose to give the DB4 a final, pure water rinse. The car was patted dry using UF Ultra-Soft Microfibre Drying Towels and brought into the detailing studio. The wheels were then removed to allow for thorough drying and polishing with Gtechniq M1 All Metal Polish, burnishing them to a high shine.

Inspection under high-intensity lighting showed up some light swirls and a few patches of more significant marring in the paintwork.

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

To remove the heavier marks, a FLEX PE14-2-150 Rotary Machine Polisher was used with a Flexipads PRO-Detail Hex-Logic Orange Cutting Pad and PolishAngel Esclate Lotion.

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

To remove the lighter marks, the paint was refined with the RUPES BigFoot LHR15ES Orbital Polisher, a Flexipads Microfibre Finishing Disc and PolishAngel Esclate Lotion.

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

Using Esclate was perfect because it’s a very light polish with little abrasive component. By changing the pad and the machine type I was able to generate the right amount of cut for each task. To tackle the more heavily marked areas I used a rotary polisher to generate more heat, and a heavier cutting pad, whereas for refining I used a DA polisher and a finishing microfibre pad. Although Artificial Clearcoat is designed to fill in blemishes I wanted to correct the paintwork as far as possible first which took a full day. Then, use Artificial Clearcoat to resolve any minor issues and also act as a primer for the protective top coat. – Derek Ginger, Master Detailer, UF Detailing Studio

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

Unlike ceramic sealants, IPA or panel wipe type product should not be used in conjunction with Artificial Clearcoat. So, once the paintwork had been refined, a few drops of Artificial Clearcoat were applied to a Kamikaze Collection Green Felt Machine Polishing Pad, specifically designed for the application of this product.

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

The product is worked into the paintwork on a DA polisher (in this case RUPES BigFoot LHR 12E Duetto) at a low speed, thereby generating little heat. The area is then wiped lightly with a microfibre to remove any residue. Once the whole of the vehicle has been treated with Artificial Clearcoat two coats of Kamikaze Collection Miyabi Coat were applied to provide an enhanced level of water beading, protection from water spot marks and a high gloss finish. Translated from the Japanese, the word ‘miyabe’ indicates the pleasure and joy experienced from something being perfect and stylish. Miyabi Coat certainly lives up to its name. To add a final element of durability and protection, a layer of ISM Coat was applied.

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

The resilience of the new clearcoat layer was impressive and the overall combination of the three Kamikaze coatings created a result that was stunning to look at!

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

Aston Martin DB4 Glasscoat Protection For A Sensitive Clearcoat

UF Detailing Studio – Award Winning Detailing. Call 0333 800 8004 to discuss your requirements and arrange a free vehicle appraisal.

Facebook
Facebook
Instagram
Pinterest
Pinterest
Google+
Google+
LinkedIn
RSS