Kamikaze Collection Stance Rim Coat 3.0 (30ml)

Professional Use Wheel Coating

Alloy wheels are expensive components of modern vehicles and their condition can affect the overall appearance of the car. It is, therefore, essential to ensure they are cleaned regularly and protected against the potentially damaging effects of industrial and chemical fallout.

Dirty water, grime and oils adhere to wheel lacquer and quickly become baked on. Brake dust particles can be even more damaging as they bond while hot and begin oxidising quickly. These particles expand as they oxidise and left in situ can cause pitting on the surface of the wheel.

Using state-of-the-art technology, Stance Rim Coat V3 combines unique components that, once cured, form a slick, heat resistant barrier that repels water, dirt, oils and grime as well as inhibiting the build-up of brake dust. Treated rims maintain gloss and are easier to clean during the weekly wash.

V3 contains Graphene which means an even greater hardening of the surface takes place, plus the addition of a super quick drying polysilazane material means the combination makes for a significantly improved initial curing time. This is a super impressive sealant and is recommended for professional application due to its greater ability for greater hardness.

Features & Benefits:

• Professional application recommended
• Heat resistant, hydrophobic coating with improved surface hardening
• Protects wheels from road grime & brake dust build-up
• Does not rely on heavy solvents so does not produce fumes
• Treated rims are easier to maintain without the use of harsh chemicals
• Suitable for lacquered & painted wheels only
• One coat lasts up to 2 years
• Version 3

Directions for use:

• Ensure Wheels are contaminant free and dry
• Use a panel wipe for final surface preparation
• Candy gloss finish
• Shake bottle well
• Apply several drops onto the applicator
• Optimum application conditions: 10-25°C, Humidity 40-70%
• Apply a slow and even layer in straight lines using the applicator pad
• Remove residue with a soft microfibre towel after 2-3 minutes of applying (dispose of towel after use)
• If the inner wheel is not lacquered, a thicker layer can be applied for increased hardness and durability
• Once fully wiped off, the coating will be dry to touch in 2-3 hours and fully cured after 24 hours
• If you wish to apply 2 coats, wait 1 hour in between coats
• Avoid contact with water / moisture for 24 hours

Size: 30ml

Material Safety Data Sheet (MSDS)