200 Premium Power Cut

Gelcoat Quick Cut

Menzerna Premium Power Cut 200, a cutting polish that delivers unparalleled cut and shine on a wide range of materials. Whether you’re working with gelcoat, topcoat, GFC, CFRP, composites, perspex, PE resin, or boat paints, this product is designed to give you the best results. Experience exceptional outcomes in the construction and detailing of industrial boats and caravans. The high abrasiveness of this product significantly reduces the effort required for polishing, resulting in cost savings due to its low consumption. Perfect for any gelcoat application, it boasts a flawless cut rating of 10/10 and a sleek gloss rating of 6/10.

Features

• Fantastic Cut on Gelcoat
• Suitable for GFRP, CFRP-Composites, Perspex, PE-resin
• One for the best cutting compounds for boat paints
• High abrasiveness reducing the necessary polishing effort considerably
• Low consumption ensures cost savings

How To Use

• Clean the surface thoroughly.
• Shake the bottle and apply about 15g of polishing compound to the double-sided lambswool.
• Work in a crossing motion. Apply strong, even pressure while polishing and run the product at a consistently low speed.
• When the product has been homogeneously distributed and worked into the surface after a few seconds, increase the speed.
• Work over as large an area as possible to reduce heat build-up at certain points.
• The polish is fully applied when only a slightly transparent or oily film is visible.
• Remove polish residues with a microfibre cloth.
• Optionally, clean with Menzerna Control Cleaner to check the polishing result.
• Grinding and wear marks are now removed. For a glossy surface, apply a Menzerna Finish product as required, e.g. when using on dark paintwork, to remove any holograms and polishing marks.