BMW X5 - Nilesh Kalyan - Winner January 2017
Entered for the January 2017 competition.
Enter Competition | Back to Entries
 |
Name: Nilesh Kalyan
Make: BMW
Model: X5
Year: 2014
Viewed: 5611 times.
Votes/Comments: 81
|
Send to a Friend
|
Products Used
How Nilesh Used Our Products
- I started by spraying the KKD Ferrum on all of the alloys (this step was done without pre-rinsing the alloys so as not to "dilute" the product. The Ferrum was left to dwell for approx 3-5mins.
- I then went over each part of the alloy with a small detailing brush, ensuring I got into all the small crevices. Once I had done 2 alloys I then used the Ultimate Snow Foam in a bucket with warm water and my EZ wheel brush and proceeded to clean each part of the alloy including the barrel. I also used the Chemical Guys Green flag tipped brush to clean the face of the alloy. Once I had done this for all 4 alloys I then dried them with my microfibre cloths.
- Once the alloys were dried I then sprayed each alloy using the Gtechniq Panel Wipe and ensuring I got into the barrel and the small crevices of the alloy to ensure that there were no oils or any other product so the C5 would bond directly to the alloy. I carried out this step for all alloys.
- I then used the Gtechniq C5 with the supplied applicator and started to apply the barrel first, followed by each spoke of the alloy, this ensures I do no miss any part of the alloy out.
Report Abuse