BMW 635csi (e24) - Konstantinos Loizou
Entered for the October 2008 competition.
Enter Competition | Back to Entries
 |
Name: Konstantinos Loizou
Make: BMW
Model: 635csi (e24)
Year: 1986
Viewed: 6482 times.
Votes/Comments: 3
|
Send to a Friend
|
Products Used
How Konstantinos Used Our Products
Listed above are the products I use on this car at various stages to get the 'Ultimate Finish'.
The basics stages are as follows - a wash using a 2-bucket method followed by a light clay. Then the car is wiped down using Regulars Last Touch. Either a light working of 3M followed by Autoglym SRP is used to remove any swirls, and then the car is buffed and wiped down again
From there, I go over the car using the Clearkote Glaze, this helps giving a wet look to the paint, and once that’s done I follow with the Victoria’s Wax. After each coat it is layered and buffed off, I follow it with a 2nd coat.
Then I move to all the detail work, windows, rubber, glass and the car is finally topped of with Zaino Z8 Final Spray.
If I’m going for it, it’s a 2-day process, with the wax given 12 hours to cure between layers.
Thanks for looking and taking the time to read this.
Report Abuse