Bilt Hamber Auto-Foam Pre-Wash Cleaner (5L & 25L)

High Foaming, Non-Contact Pre-Wash Cleaner From Bilt-Hamber.

Bilt-Hamber Auto-Foam is a premium quality, foaming pre-wash treatment, designed to soak and saturate soiled vehicle paintwork prior to the application of vehicle shampoo. Auto-Foam is gentle and can be used in conjunction with all pressure washer foam lances.

The creation of Auto-Foam was the result of considerable in-house research and development byt Bilt Hamber. Auto-Foam will further limit the likelihood of paintwork damage by providing you with stunningly clear FOD-free paint that is ready for future finishing.

It's pointless to spend money on expensive waxes and sealants to attain a beautiful finish if you don't get the basics right from the start. Because of poor detailing preparation and the impacts of Foreign Object Damage (FOD) on paint (such as 'own goal' damage from grit and dirt) that must be eliminated, most swirls and paint flaws must be rectified later in the process. Regardless of how cautious we all try to be, mistakes are made and harm is done. So it makes sense to be as meticulous and careful as possible from the start of the cleaning procedure, rather than simply at the finish.

Bilt Hamber Auto-Foam is a high-quality, foamy water-based pre-wash product that is designed to soak and penetrate dirty car paintwork before applying vehicle shampoo and paint protection. Auto-Foam is also mild and may be used with any pressure washer foam lance. Auto-Foam will panel-dwell for approximately five minutes when applied at a typical PIR (Panel Impact Ratio) of 4%. Auto Foam is designed to provide optimum soaking while also rinsing easily. It is not intended to be a just cosmetic high-foam product, but rather a useful material.

Auto-Foam is constructed of biodegradable components, is extremely tough on soil and grime, and is paint-safe. Because of the non-caustic formulation, even regular usage will not harm paint binders. Without the need for physical intervention, our hard-working surfactants will fight and penetrate the toughest road filth and grime.

During the panel-dwell period, Bilt Hamber Auto-Foam’s bubbles will systematically burst and move, encouraging our soaking and cleansing agents to start working. They negate the impacts of road filth by bonding within our surfactant blend and then lifting and physically removing it from painted surfaces, avoiding damage caused by swirling and marking during further detailing.

Features & Benefits:

• Auto-Foam will "panel dwell" for approx 5 - 8 minutes
• Formulated specifically to offer maximum wetting
• Easy to rinse off
• Wax-friendly
• Tough on soil & grime - gentle to paint
• Non-caustic & biodegradable
• New easy pour container
• pH Approx. 13.0 (concentrated solution)

NOTE: Auto-Foam is only recommended for use with pressure washers and is not suitable for use with foam guns such as the Gilmour.

Size: 5 Litres & 25 Litres (Select from the dropdown menu above).

Documents

Bilt Hamber Auto Foam Guide

Bilt Hamber Auto-Foam Pre-Wash Cleaner MSDS