The Ultimate Finish
Sales & Customer Support: 01474 360 360
Home > Exterior Car Care > Decontamination > Reflow
Autoglym zero star rating for product page

Reflow Bird Dropping Repair (2 Pack)

View Reviews zero star rating for product page Product code: REFLOW2
Our Price (inc VAT): £17.95
Awaiting Stock

Remove bird droppings safely from your car.

Reflow from Autoglym is a specialist product carefully engineered to tackle the troublesome etching or marring that can occur following bird droppings on paintwork. Even when the brunt of the droppings are cleared away, etchings or impressions can stain a vehicle's paintwork. Reflow will help to rectify such imperfections on car paintwork using water-activated thermal transfer packs designed to heat to a specific temperature which they retain for a specific length of time to create the optimum conditions for the paint to soften, reflow and fill the etchings caused by the bird droppings. As the pack cools, the paintwork resets, effectively healing the affected area and removing the bird dropping mark.

Each Reflow pouch contains five thermal transfer packs. Reflow should be placed and left on the damaged paintwork, untouched, for 30 minutes.

Features & Benefits:

  • Ground breaking, quick & easy to use solution
  • Reduces the time and effort involved in traditional bird lime damage rectification
  • Safer to use than alternative methods such as machine polishing
  • Leaves a perfect finish
  • Removes the risk of imparting any additional defects including holograms & swirl marks
  • Apply as many packs as needed, just add water

Directions for use:

  • Important: Refer to the health & safety information on the pack provided before use
  • Do not add water to the pack unless you are next to the vehicle and ready to start the process, as the pack will heat up quickly
  • Reflow is for use on vehicles with clear coats only
  • Also safe for use on painted plastic parts with clear coats
  • Not suitable for any other surfaces other than those mentioned
  • Do not use Reflow on matt, cellulose paint finishes or wraps
  • To begin with, wash and dry the vehicle to remove all trace of the dropping
  • Tear off the top of the pack where instructed
  • Add 40ml of water to the fill line and fold over the top of the pack twice
  • Remove the peel-able sticker from the vent hole and reuse it to secure the fold at the top of the pack
  • Caution: the vent hole will release very hot steam
  • Holding the pack horizontally, massage the heating pad firmly with your thumbs for 10 seconds to ensure heating pad is completely saturated
  • Quickly place it over the affected area with the vent hole showing on top and the heating pad over the defect
  • Use the supplied adhesive tabs to secure the pack to the paintwork
  • Leave the pack untouched on the paintwork for 30 minutes
  • Once cooled, carefully remove and dispose of the pack in the general waste
  • Important! Wait 10 minutes for the paintwork to set before touching or applying any other products as new marks could be introduced

Size: 2 Pack

Material Safety Data Sheet (MSDS)

Customer Reviews

There aren't any reviews for this product yet. Why not be the first?

Review this product

Share your thoughts with other customers

Write a Review