Polar Seal

Hydrophobic Protection Applied Through Your Foam Lance

The pH-neutral sealant that delivers hydrophobic coating via pressure washer application. Autoglym Polar Seal provides durable water-beading protection with high-gloss finish, applied as foam to clean, wet paintwork then rinsed off and dried. Wax-safe and acting as a top-up to existing protection, this innovative sealant simplifies the sealing process while delivering professional results with reduced drying time and enhanced gloss.

Why Our Customers Love the Autoglym Polar Seal

✅ Easy foam lance application eliminates traditional hand-application and buffing process.
✅ Creates durable hydrophobic coating that improves water beading and reduces drying time.
✅ Wax-safe formulation acts as top-up to existing protection rather than stripping it.
✅ High-gloss finish enhances paintwork appearance while protecting.

What Makes It Special?

This is sealant application reimagined for the foam lance generation. The chemistry works during the rinse stage, creating protection without traditional waxing labour.

• Only 40ml required per vehicle, making the 1-litre bottle incredibly economical.
• Applied to wet paintwork and rinsed off, no separate drying before application needed.
• Delivers genuine hydrophobic properties, not just temporary beading.
• Safe for monthly application without build-up issues.
• Ideal for time-efficient protection, maintaining between full details, or foam lance enthusiasts wanting complete Polar system.

Specifications

• Size: 1 Litre.
• Formulation: pH-neutral hydrophobic sealant.
• Application: Via foam lance/pressure washer (40ml max per vehicle).
• Dilution: 40ml Polar Seal + minimum 200ml water.
• Frequency: No more than once per month recommended.
• Not Suitable For: Soft top convertibles, windscreen (direct application).
• Best Paired With: Polar Blast (pre-wash), Polar Wash (cleaning), InstaDry cloth, Fast Glass.

Pro Tips From Ultimate Finish

“Seriously, only 40ml per car, using more doesn’t improve results and can actually compromise the finish. The vehicle must be wet when you apply Polar Seal, it’s designed to bond during the rinse stage. Don’t apply to windscreen, the hydrophobic effect can cause smearing with wipers.”

How To Use
1. Ensure bodywork and wheels are cool, out of direct sunlight.
2. Prepare surfaces with Polar Blast then Polar Wash to ensure clean substrate.
3. Pour maximum 40ml (four capfuls) into foam bottle, add minimum 200ml water.
4. Spray Polar Seal onto clean, wet vehicle covering all exterior surfaces (avoid windscreen).
5. Rinse thoroughly and dry with cloth (do not air dry to prevent water spotting).
6. Clean windscreen and wiper blades with Fast Glass to prevent smearing.

Important Notes
⚠️ Do not use more than 40ml per vehicle, over-application compromises finish.
⚠️ Avoid direct application to windscreen, can cause wiper smearing.
⚠️ Not suitable for soft top convertibles.
⚠️ Vehicle must be dried with cloth, air drying causes water spotting.