ReView Glass Polish

The Best Glass Polish Ever

A strong active polish, Bilt Hamber RE-VIEW efficiently removes mineral stains, water-repellent coatings, hard water stains, and glass-contaminating films. Even when applied by hand RE-VIEW will remove these films, unlike other glass polishes. It is also feasible to utilise a machine.

Combine with Bilt Hamber Traceless for the ultimate fin clear glass.

Features

• Use by hand or machine polisher.
• Removes old coatings.
• Removes hard mineral staining
• Remover imbedded contamination.

How To Use

• Shake well before use.
• Treat only cool glass surfaces, out of direct sunlight.
• Clean glass of loose particulate dirt.
• For every 30cm square of glass use approximately one pea-sized amount applied by a damp, soft cotton cloth or suede microfibre.
• Work well into glass using small circular motions.
• Mist lightly with water occasionally if machine polishing or if treating larger areas of glass.
• Residue may be rinsed when still wet, or buffed easily away with a dry microfibre cloth once FULLY dried.
• Test that glass does not repel water on completion by atomising water onto the cleaned area. Fully cleaned and decontaminated glass will show a flat uniform film of water.
• Wipe dry after test.
• Precautions:
• Apply only on glass surfaces.
• Do not use on aftermarket or plastic tinted windows.
• Test at small scale on unusual glass finishes.
• Do not use on textured glass.
• Store in cool conditions away from direct sunlight and do not allow to freeze.