Medium Cut Polish 2500

Previously Known As PO203.

Removing sanding marks, particularly from softer paint finishes can be tricky as the more aggressive abrasives the greater the likelihood of incurring micro-marring.

Menzerna Medium Cut Polish is specifically designed to work well with soft paintwork. Containing diminishing abrasives and lubricants, Medium Cut Polish can be worked for longer to ensure abrasive particles break down fully, eliminating both sanding marks and blemishes, leaving a shinier finish without micro-marring.

Use with the Menzerna Yellow Polishing Pad for a heavier initial cut or combine with the Menzerna Green Finishing Pad for softer paintwork to avoid holograms.

Features:

• Works well with soft paint finishes
• Lubricating oils allow for longer working times
• Does not contain fillers – minimal drop-back
• Eliminates sanding marks on softer paints
• Suitable for the removal of light defects on scratch-resistant paints

How To Use:

• Ensure surface is clean, dry & cool to the touch
• Apply to a medium or hard foam polishing pad or lambswool pad depending on the requirements of the job
• If using a DA polisher, apply 3-4 pea-sized drops to the pad
• If using a rotary polisher, apply 1-2 pea-sized drops to the pad
• Place pad against paintwork & work at low speeds to spread compound
• Work abrasives at medium speed (3-4 with a DA, 2-3 with a rotary), gradually speeding up to refine out
• Wipe residue with soft microfibre
• Can also be applied by hand with a foam applicator

Technical Specification:

• Cut: 5/10
• Gloss: 7/10
• Water based
• Suitable for use with DA, rotary or by hand
• Suitable for all types of paint finish
• Contains diminishing abrasive particles