The Nozzle Pack That Won't Scratch Your Paint If You Drop It
The Pressure Washer Soft Nozzle Pack includes three stainless steel nozzles (15°, 25°, 40°) with soft rubber collars that protect paintwork if dropped or knocked against panels. Available in multiple orifice sizes matched to different pressure washers, they give you the right spray pattern for pre-rinse, wash stage, and final rinse without constantly swapping equipment.
Why Our Customers Love the Soft Nozzle Pack
✅ Soft rubber collars protect paintwork if nozzles are dropped or contact panels.
✅ Three spray patterns (15°, 25°, 40°) cover all wash stages.
✅ Multiple orifice sizes available to match different pressure washers.
✅ Stainless steel construction for durability.
✅ Standard 1/4" quick-connect fitting.
What Makes It Special?
Standard nozzles are hard metal; drop one on your bonnet or knock it against a panel and you've just put a dent in your paint. The soft rubber collar on these absorbs impact and protects the surface. The three spray patterns let you match pressure to the task; narrow 15° for blasting wheel arches, medium 25° for general rinsing, wide 40° for gentle final rinse. Multiple orifice sizes available means you select the size matched to your pressure washer's flow rate.
- Three nozzles: 15°, 25°, 40° spray patterns.
- Soft rubber collars protect paintwork.
- Stainless steel construction.
- Standard 1/4" quick-connect fitting.
- Multiple orifice sizes available (0.35, 0.37, 0.40, 0.42, 0.45).
Specifications
Spray Patterns: 15°, 25°, 40°.
Material: Stainless steel with soft rubber collar.
Fitting: 1/4" quick-connect.
Available Orifice Sizes: 0.35mm (Duo), 0.37mm (Quad), 0.40mm (Pro), 0.42mm (Tradie), 0.45mm.
Pack: 3 nozzles.
Note: Not compatible with WashR FLO.
Pro Tips From Ultimate Finish
"Match the orifice size to your pressure washer's flow rate; too small and you're over-pressuring the pump, too large and you lose cleaning power. The 15° is for wheel arches and undersides where you need concentrated pressure. The 25° handles most rinsing work. The 40° is for the final rinse and delicate areas like badges and trim. The soft collar genuinely protects paintwork; we've dropped these on bonnets without damage. Keep them clean; debris in the orifice ruins spray pattern and can damage seals."
How To Use
1. Select correct orifice size for your pressure washer.
2. Use 15° for wheel arches and heavily soiled areas.
3. Use 25° for general rinsing work.
4. Use 40° for final rinse and delicate areas.
5. Rinse nozzles after use to prevent debris buildup.
Important Notes
⚠️ Not compatible with WashR FLO.
⚠️ Select orifice size matched to your pressure washer's flow rate.
⚠️ Clean nozzles regularly to prevent debris affecting spray pattern.
⚠️ Soft collar protects paintwork but still use caution around panels.