Blast Away Hidden Dirt That Microfibre Can't Touch
The compressed air solution for detailers who've had enough of leaving sand embedded in carpets, water trapped in panel gaps, and polishing pads that take hours to dry. ChemicalWorkz Mini Air Gun delivers 170 litres per minute of focused airflow at just 170 grams, making it effortless to lift stubborn sand from carpet fibres before vacuuming, or rapid-dry polishing pads between correction stages. Compact, CE-certified, and built for daily workshop use without the bulk of industrial air guns.
Why Our Customers Love the ChemicalWorkz Mini Air Gun
✅ Lifts embedded sand and dirt from carpet fibres that vacuums alone can't shift, making interior cleaning dramatically more effective.
✅ Rapid-dries polishing pads and microfibre cloths between stages, eliminating waiting time during multi-stage corrections.
✅ Weighs just 170g so you can work through entire interiors or multi-car sessions without hand fatigue.
✅ Operating pressure of 4.5-6.3 bar provides serious cleaning power from a standard garage compressor.
What Makes It Special?
This isn't an oversized industrial tool adapted for detailing. The ChemicalWorkz Mini Air Gun is purpose-designed for the cleaning tasks detailers actually face, compact enough for intricate work yet powerful enough to transform your workflow.
- 170 litres per minute air consumption agitates carpet fibres to release trapped sand, grit, and debris before vacuuming.
- Blasts polishing pads and microfibre towels dry in seconds, keeping your correction work flowing without pad changes.
- Lightweight 170g design reduces fatigue during multi car sessions.
- Easy compressor connection means it's ready to use with your existing 4.5-6.3 bar setup.
- Ideal for professional detailers tackling sandy interiors or enthusiasts with air compressor setups.
Specifications
- Operating Pressure: 4.5-6.3 bar.
- Air Consumption: 170 litres per minute.
- Weight: 170g (ultra-lightweight).
- Certification: CE-marked for safety compliance.
- Best Paired With: Garage air compressor rated for continuous 4.5-6.3 bar output.
Pro Tips From Ultimate Finish
"For interiors with embedded sand, we blow the carpets and mats thoroughly, it lifts particles to the surface, and you'll be amazed how much more the vacuum picks up afterwards. Another tick is between polishing stages, a quick blast into your foam pads removes dried residue, or dry them completely after a run under the tap. A tiny spray of air tool lubricant into the nozzle and inlet every few uses keeps it running smoothly for years."
How To Use
1. Visually inspect gun before each use for damage or worn parts.
2. Connect air gun to your compressor and check coupling and hose condition.
3. Hold trigger continuously while moving the gun slowly in circular motions over the surface.
4. Maintain 3cm distance from the surface being cleaned to prevent damage.
5. After use, spray a small amount of lubricant into nozzle outlet and air inlet to extend lifespan.
Important Notes
⚠️ Always wear appropriate safety equipment: eye protection, respiratory protection, gloves, and hearing protection.
⚠️ Only use accessories and spare parts approved by the manufacturer.
⚠️ Any part suspected of being overloaded must be immediately taken out of service and replaced.
⚠️ Do not use for purposes other than described, only for compressed air cleaning applications.