FibreKing Gold Label Microfibre Cloths Premium Performance for Every Detail
FibreKing's Gold Label Microfibre Cloths are the step up when the job demands the best. The ultra-absorbent 400gsm variant, these cloths are built for cleaning, polishing, and detailing work where finish quality actually matters. The 70/30 polyester/polyamide blend delivers a noticeably softer, denser cloth that lifts and locks in contaminants without leaving a mark on your paintwork, glass, or trim.
Why Our Customers Love the FibreKing Gold Label Microfibre Cloths
✅ Super absorbent — holds up to 10x its own weight in water, wet or dry.
✅ Lint-free and non-abrasive — safe on painted surfaces, glass, and delicate trim.
✅ Safely removes wax residue without scratching or marring the finish.
✅ Tagless design eliminates any risk of surface scratches during use.
✅ Reusable and machine washable for long-term professional performance.
What Makes It Special?
The Gold Label is where FibreKing's microfibre technology really shows its quality. The higher polyamide content in the 70/30 blend gives these cloths a noticeably softer hand feel and improved absorbency over standard cloths — meaning they glide across surfaces rather than drag, and they soak up product residue in fewer passes. The 400gsm option in particular is exceptional for final wipe-downs, wax removal, and any task where you need confidence the cloth won't let you down.
- Holds up to 10x its weight in water — outstanding for drying and residue removal.
- Lint-free, non-abrasive construction safe on all vehicle surfaces.
- Removes wax, polish, and detailing product residue without scratching.
- Works effectively with or without chemicals.
- Suitable for cars, motorcycles, boats, karts, and home or workshop use.
Specifications
- Material: 70% Polyester / 30% Polyamide.
- Size: 40.6cm × 40.6cm.
- Density: 400gsm
- Design: Tagless for scratch-free use.
- Care: Reusable and machine washable.
Pro Tips From Ultimate Finish
"We tend to reach for the 400gsm Gold Label for wax and polish removal — the extra weight and density means it picks up residue in one or two passes rather than smearing it around. Fold it into quarters and work panel by panel, turning to a fresh face as you go.Separating them out early saves a lot of frustration."
How To Use
1. Machine wash before first use to remove any loose manufacturing fibres.
2. Fold into quarters to give yourself multiple clean working faces.
3. Apply your chosen product to the surface or directly to the cloth as required.
4. Work across the surface using light, overlapping passes.
5. Turn to a fresh face of the cloth as it picks up product or dirt.
6. After use, machine wash on a gentle cycle at 30-40°C using 25-50ml of FibreKing Microfibre Wash.
7. Run an extra rinse cycle to ensure all detergent is fully flushed from the fibres.
8. Air dry or tumble dry on the lowest cool setting — do not iron.
Important Notes
⚠️ Wash before first use to remove loose manufacturing fibres.
⚠️ Do not use fabric softener or chlorine bleach — both will damage the microfibre and reduce absorbency.
⚠️ Do not iron — heat will permanently damage the filaments.
⚠️ Wash separately from household laundry and with similar colours — some colour bleed may occur on the first wash.
⚠️ Avoid strong chemical cleaners that may cause dye bleeding — always test on a small area first.