Ex SOL

Water-Free Solvent Preparation for Perfect Coating Adhesion

The professional degreasing agent engineered for intensive surface preparation. Nanolex EX SOL features water-free solvent formulation that removes stubborn oil, wax, and polish residues completely, leaving perfectly clean, dry surfaces ideally prepared for sealant or coating application. Where water-based cleaners leave trace contamination, this German solvent solution penetrates deep and evaporates completely for optimal adhesion.

Why Our Customers Love the Nanolex EX SOL

✅ Water-free solvent formulation thoroughly removes stubborn residues for perfect surface preparation.
✅ Leaves perfectly clean, dry surface with optimal adhesion for sealants and coatings.
✅ Professional-grade intensive cleaning for demanding preparation jobs.
✅ Safe for paint, glass, and plastic surfaces when used correctly.

What Makes It Special?

This is proper professional panel preparation, not household cleaning adapted for cars. The water-free chemistry is crucial for coating preparation where any residue compromises bonding.

• Penetrates deep into contamination that water-based cleaners cannot fully remove.
• Evaporates completely without leaving trace residue that affects coating adhesion.
• More intensive cleaning than alcohol-based EX AL for heavily contaminated surfaces.
• Essential preparation step for ceramic coating application.
• Perfect for pre-coating preparation, removing polish residues, or ensuring clean bonding surfaces.

Specifications

• Size: 750ml.
• Formulation: Water-free solvent-based degreaser.
• Application: Direct to surface or onto microfiber cloth.
• Safe For: Paint, glass, plastic (test first).
• Comparison: More intensive than EX AL (alcohol-based).

Pro Tips From Ultimate Finish

“This is essential before ceramic coating application, use fresh microfiber cloths regularly, dirty cloths just redistribute contamination. For coating prep, wipe panel with EX SOL, then immediately wipe with fresh dry cloth before solvent evaporates. Test on plastics first as solvents can affect certain trim materials. The surface should feel absolutely squeaky clean after treatment, any slickness indicates remaining residue. We use this religiously before every ceramic coating application, the difference in bonding is measurable.”

How To Use
1. Spray EX SOL directly onto surface or onto clean microfiber cloth.
2. Wipe surface thoroughly with clean microfiber cloth.
3. Continue wiping until surface is completely dry and residue-free.
4. Repeat process if necessary to completely remove stubborn residues.
5. Proceed immediately with sealant or coating application.

Important Notes
⚠️ Work in well-ventilated area, water-free solvents require proper airflow.
⚠️ Test on plastics in inconspicuous area first to verify compatibility.
⚠️ Use clean microfiber cloths, dirty cloths redistribute contamination.