Gtechniq EXO v5 Ultra Durable Hydrophobic Coating (30m & 50ml)

Improved Version 5 of Gtechniq EXO

The most hydrophobic ceramic coating Gtechniq offer. The latest EXO v5 Ultra Durable Hydrophobic Coating has been designed to offer you a super easy application and an increased water contact angle to watch water effortlessly roll off your car.

Gtechniq have also focused on the clogging issue which is the pain of many coatings on the market. Overtime microscopic dirt will "clog" the sealant reducing its effectiveness on repelling dirt and water. The EXO v5 is a less porous coating making it much more resistant than its predecessor to water spots and in-ground dirt.

With a longevity of 18-24 months as a single coating or a topper to C1 or CSL, EXO v5 achieves this with its superior 115 degree water contact angle and 13 degree water draining angle.

We also offer the new EXO v5 in a variety of kits here.

Features:

• Extreme hydrophobicity – water slides off treated surfaces
• 115 degree water contact angle
• 13 degree water draining angle
• Forms a hard film that makes water spots easier to remove
• Resistant to highly alkaline or acidic wash solutions
• Now aids the prevention of micro-marring
• Repels dirt, oils, & fallout
• Enhanced durability – lasts for up to 2 years
• Can be used as a stand-alone coating or as a top coat
• For cars up to medium estate (i.e. BMW 3 series touring) – select 30ml
• For larger cars, select 50ml

How To Use:

• Ensure vehicle is clean and dry, and the paintwork is swirl-free and prepared with Panel Wipe (not necessary if applying over C1 / CSL).
• Ensure panel is warmer than 5 degrees Celsius.
• Apply 5 – 10 drops of EXO v5 to the supplied applicator.
• Apply to the panel using overlapping strokes, working an area of around 60cm x 60cm.
• If the panel is 15 degrees C or lower, allow EXO v5 to cure for two minutes, then remove residue with a soft clean microfibre. For temperatures between 15 and 25 degrees C, allow one minute to elapse prior to buffing. For temperatures higher than 25 degrees, buff immediately.
• With a new microfibre, buff panels again to ensure all residue is removed.
• Allow EXO v5 to cure for 12 hours prior to getting wet and 1 week before washing.
• If Layering over C1 leave 2-12 hours before application
• If layering over CSL apply immediately but not later that 24 hours

What's Included:

• 1x EXO v5 – 30ml or 50ml (please select from drop down menu)
• 1x AP2 Ultra Soft Foam Filled Applicator Pad
• 1x Master Instruction Leaflet

Storage:

• Unopened bottles of EXO v5 have a 12-month shelf life from time of purchase
• Opened bottles of EXO v5 should be stored in a cool, dry area out of direct sunlight
• Opened bottles have a maximum life of 3 months

Sizes: 30ml & 50ml (Select from drop down menu above)

Documents

Please note: Due to Civil Aviation Authority (CAA) legislation, we are unable to ship this product by Air. For European destinations please select European Standard By Road from the available delivery options during checkout.

Material Safety Data Sheet (MSDS)