From BigBoi, Hand-Held Touchless Dryer.
As every car care enthusiast knows, non-contact detailing methods greatly reduce the chances of putting scratches into paintwork. Whilst the wash process still requires a mitt, the drying process no longer requires a drying cloth!
Dust and dirt can become trapped in the long, absorbent fibres of drying cloths and can cause scratches when the towel is rubbed over the paint. The edges of cloths can cause marks as the towel is 'whipped' back and forth. Synthetic chamois can be ineffective in soaking up water and natural chamois can remove wax protection.
The BigBoi Buddi caters for the enthusiast who wants an affordable yet high-quality & high-performance drying solution. Super-portable & compact, the all-new, Buddi features a powerful 1000w 1.2 HP motor that pumps out at a CRAZY 250 km/h warm (25 degrees above ambient) filtered air that will thoroughly dry your small car, bike, or jet ski in minutes. Standing at only 240mm the BigBoi Buddi is the perfect drying solution for your detailing arsenal.
Best hand held car air dryer, great for wheels and engine bay drying. Use a motorcycle blower to stop water spots and residue after your motorcycle wash.
IMPORTANT: Equipped with a UK 3-PIN plug suitable for 220-240v, please only order if your country supports this supply.
Features & Benefits:
- Touchless drying keeps paintwork safe from scratches & swirls
- The most efficient single motor in the industry (1000 watts / 1.2HP)
- Great for drying around filler caps, wheel spokes, calipers & nuts
- 2-stage adjustable wind control from 72km/h up to 220km/h (45mph - 137mph)
- BigBoi Temperature Technology (BTT) - set 25 degrees Celsius (°C)
- Uses filtered air - safer than using a leaf blower or pet dryer
- Use on paint, glass, wheels, chrome, fabric convertible roofs
- Supplied with 2 interchangeable nozzles
- Foam air filter included (washable & reusable)
Technical Specification:
- 1000 watt motor producing up to 1.2HP
- Airflow: (FPM) 19,680 ft/min
- DB rating: Low 73, High 78
- 230 volt UK plug
- Low noise reduction filter system
- Neoprene rubber hose nozzle
- BigBoi Temperature Technology (BTT)
- EZ Change foam filter
- Height 240mm
- Weight: 1.7kgs
IMPORTANT: Equipped with a UK 3-PIN plug suitable for 220-240v, please only order if your country supports this supply.