Nanotechnology Glass Protection That Lasts Up to 24 Months
The serious long-term glass sealant using advanced nanotechnology. Nanolex Glass Ultra Sealant forms an invisible hydrophobic shield that makes rain bead and roll away at speeds of just 50 mph, delivering virtual self-cleaning performance. Protection lasts up to 24 months or 15,000 miles far beyond anything a standard glass spray achieves.
Why Our Customers Love the Nanolex Glass Ultra Sealant
✅ Rain beads and rolls away at just 80 km/h for genuinely clear wet-weather visibility.
✅ Nanotechnology protection lasts up to 24 months or 25,000 km.
✅ Reduces glare for safer night driving and makes glass easier to clean.
✅ Works on windscreens, side windows, mirrors, and even headlights.
What Makes It Special?
This is proper long-term glass protection, not a spray-on film that wears off after a few washes. The nanotechnology bonds to glass and stays bonded for months.
- Invisible hydrophobic layer repels rain, dirt, and insects simultaneously.
- Reduces dirt adhesion making ongoing glass cleaning much easier.
- Reduces glare for improved visibility in all light conditions.
- Works as part of the Nanolex glass system clean, protect, maintain.
- Perfect for daily drivers wanting safer wet-weather visibility, long-distance commuters, or anyone serious about glass protection.
Specifications
- Available Sizes: 30ml, 100ml.
- Technology: Nanotechnology-based hydrophobic coating.
- Water Beading: Active at 80 km/h (50 mph) and above.
- Durability: Up to 24 months or 25,000 km.
- Cure Time: 12 hours minimum before rain or wiper use.
- Best Paired With: Nanolex Glass Cleaner (prep), Nanolex Glass Polish (preparation).
Pro Tips From Ultimate Finish
"We always polish the glass before applying this, it makes such a difference to how well it bonds and how long it lasts. We find applying a second layer after about an hour gives us noticeably better durability, well worth the extra ten minutes work. We've had it on headlights too and it keeps them so much cleaner, makes a real difference on night drives. The 30ml will do a full car but the 100ml allows you to top up the front and rear windows when required."
How To Use
1. Clean glass thoroughly, ideally with Nanolex Glass Cleaner.
2. Polish glass with Nanolex Glass Polish for optimal bonding.
3. Apply sealant evenly with clean applicator pad.
4. Allow to bond and haze slightly.
5. Buff off residue with soft microfibre cloth.
6. Allow to cure for at least 12 hours before exposing to rain or using wipers.
Important Notes
⚠️ Do not apply on hot glass or in direct sunlight.
⚠️ Allow minimum 12 hours cure time before using wipers or in rain.
⚠️ Avoid contact with plastics or rubber seals, wipe off immediately if spilled.