DA Microfiber Polishing Fine Pad

Car detailing microfiber polishing pad for moderate to fine defect removal on fully cured car paintwork.

The Rupes DA Fine Microfiber Polishing Pad delivers extremely effective rates of defect removal and at the same time provide a high-gloss finish on most paint systems. Recommended to be used with RUPES DA Fine polishing compound for moderate to fine defect removal, paint refinement, or final finishing after heavy compounding steps.

Containing a specialised microfiber material which is bonded to a semi-flexible foam backing, it allows for better control and contouring over varied panel shapes with an ideal balance of cutting and finishing ability.

Features

• Microfiber machine polishing pad
• Suitable for use with Velcro backing systems
• Excellent balance of cutting & finishing ability
• Suitable for all types of automotive paintwork & marine gel coats
• Removes moderate defects, swirls, haze and holograms on fully cured paintwork surfaces
• Pack Size 1 Pad
• Factory sealed bags to avoid contamination during transport
• 12mm thick pad

Technical

• Material — Microfibre/Foam
• Backing — Hook & Loop (velcro)
• Abrasiveness — 10/10
• Malleable— 5/10
• Paint Types — Hard, Medium

How To Use

• Keep your pads clean during use, removing excess compound with a pad tool or compressed air.
• Do not over-saturate the pad with compound.
• Wash with a pad washer or by hand with cleaning detergent for prolonged life.
• Do not allow the pad to get too hot, this can cause delamination.
• Solvents or other strong cleaners can destroy the foam.