Welcome to our new website! Reactivate Your Account Here
Sign In Basket 0
HomeKitsExterior KitsUF Snow Foam Cannon
Black November

UF Snow Foam Cannon

Original price was: £51.90.Current price is: £38.59.

In Stock

SKU: UF-PAR-UFFC Categories: , , Brand:
Snow foam lance
Brass core
Wide-mouth cap
Choose your fitting

The UF Snow Foam Lance fits on the end of your pressure washer and covers the car in thick foam before you start the contact wash. Twist the nozzle for anything from a 0° jet to a 90° flat fan. The top dial sets how much chemical goes into the mix, and turning it fully off gives you a clean-water rinse from the same lance.

Check your machine before you buy. The lance needs at least 1,000 PSI (about 69 bar) and a flow of 6.3 litres per minute. Most UK washers give their flow in litres per hour, and 6.3 L/min works out at about 380 L/h, so check the plate on yours. Pick the fitting for your pressure washer from the drop-down above.


  • 1 litreWide-mouth bottle

  • 1,000–3,000 PSIAbout 69–207 bar

  • 6.3–24 L/minAbout 380–1,440 L/h

  • 0°–90°Jet to wide flat fan

Why choose the UF Snow Foam Lance?

  • Brass where it counts — the core components are brass and the connector is stainless steel, so the working parts are metal rather than plastic.
  • Foam and rinse from one lance. Turn the soap knob fully clockwise for the richest foam, or fully anticlockwise for clean water.
  • Easier, cleaner filling. The redesigned wide-mouth cap screws on and off easily, so there’s less chance of spilling concentrate while you fill it.
  • Fits your machine. Choose your pressure washer from the drop-down and we’ll send the lance with the right fitting.

Features

  • Brass core, nylon bottle and stainless steel connector
  • 1 litre bottle with a wide-mouth screw cap
  • Top dial sets the chemical mix ratio
  • Twist nozzle adjusts from a 0° jet to a 90° flat fan
  • Soap knob turns the chemical off for rinsing
  • Sturdy skeleton-style nozzle that’s comfortable to hold
  • Takes snow foams and shampoos
  • Ideal for: pre-wash foaming on cars, motorcycles and boats

Pro tip

Put the water in first and the snow foam second. If you do it the other way round, the concentrate starts foaming in the bottle before it ever reaches the car. Shake it gently for the same reason.

Property Value
Bottle capacity 1 litre
Materials Brass, nylon, stainless steel connector
Operating pressure 1,000 – 3,000 PSI (about 69 – 207 bar)
Flow rate 6.3 – 24 L/min (about 380 – 1,440 L/h)
Max water temperature 60°C (140°F)
Spray pattern 0° jet to 90° flat fan

Fittings & codes

Fitting Code EAN

  1. Push the clear pick-up tube onto the brass nipple on the underside of the black cap.
  2. Fill the bottle with water, then add UF Ultimate Snow Foam at your preferred ratio.
  3. Screw the bottle firmly onto the cap and shake gently to mix.
  4. Attach the lance to your pressure washer wand.
  5. Set the top dial for your mix ratio and twist the nozzle to the spray pattern you want.
  6. Once you’ve finished the wash, run clean water through the lance to flush out any residue.

Warnings

  • Use only with a pressure washer rated at 1,000 – 3,000 PSI and 6.3 – 24 L/min, and with water no hotter than 60°C.
  • Make sure the bottle is fully tightened onto the cap before you use the lance.
  • Flush with clean water after every use so residue doesn’t build up inside.
  • Never point the lance at people or animals.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “UF Snow Foam Cannon”