Tar Remover

Dissolve Stubborn Tar and Road Film Without Harming Paint

The specialist cleaner that tackles tar, asphalt, and oily residues that conventional products leave behind. Nanolex Tar Remover dissolves these stubborn deposits quickly and safely without attacking paintwork, existing sealants, or wax layers. Safe for all paint types including metallic, pearl, and matte finishes, this leaves surfaces clean and smooth with zero residue.

Why Our Customers Love the Nanolex Tar Remover

✅ Dissolves tar, asphalt, and oily residues quickly without damaging paintwork.
✅ Safe for all paint types including metallic, pearl effect, and matte finishes.
✅ Does not affect existing sealants or wax layers.
✅ Leaves a completely clean, smooth surface with zero residue.

What Makes It Special?

Tar spots bond hard into paintwork over time and standard cleaners just smear them around. This dissolves them properly at source before they cause damage.

• Spray, dwell, wipe workflow makes it straightforward to use.
• Safe for glass and plastic surfaces too, not just paintwork.
• Works as needed without any risk of overuse or surface degradation.
• Protects paintwork from the long-term damage tar causes if left untreated.
• Essential after long motorway drives, road works, or any time tar spots appear.

Specifications

• Available Sizes: 750ml, 5 Litres.
• Formulation: Tar and oily residue remover.
• Dwell Time: 2-3 minutes.
• Safe For: All paint types, glass, plastic, sealants, wax.

Pro Tips From Ultimate Finish

“We always hit the tar spots as soon as we spot them, the longer they sit the harder they bond in. We spray it on, give it two or three minutes and it does most of the work for us, a gentle wipe with a cloth finishes the job. The 5-litre is well worth it if you do a lot of motorway miles, we go through it more in winter than anything else, lots more potholes flying up debris.”

How To Use
1. Ensure vehicle surface is cool and dry.
2. Spray Tar Remover generously onto affected areas.
3. Allow to dwell for 2-3 minutes to soften tar deposits.
4. Wipe off dissolved residue with microfibre cloth or soft sponge.
5. Rinse treated areas thoroughly with clean water.

Important Notes
⚠️ Treat tar spots promptly before they bond into paintwork.
⚠️ Apply to cool surfaces only.