Home > Exterior > ISM 3.0 Hydrocarbon Coating
Kamikaze Collection five star rating for product page

Kamikaze Collection ISM 3.0 Hydrocarbon Coating (30ml)

View Reviews five star rating for product page Product code: ISM-30
Price: £148.00
In Stock

Flexible, Hydrocarbon Ceramic Coating.

Kamikaze Collection ISM Coat 3.0 blends optically clear hydrocarbons with ceramic components to provide a clear, candy-gloss shine to automotive paintwork. Unlike many ceramic coatings, ISM is free from solvents and volatile organic compounds (VOCs).

In 3.0, carbon nanotubes are the latest nanoparticle additive and they have been included to improve the bond-ability for easier installation. In addition to this, because it is a conductive material, it has a very high effect on the antifouling property, which makes it difficult for the painted surface to be harmed.

Features & Benefits:

  • Easy to apply & easy to buff off
  • Provides a candy-gloss, reflective shine
  • Lasts for 24 - 36 months
  • Repels water, dirt & grime
  • Can also be used to restore plastic trim
  • Designed to resist water spotting better than traditional ceramic coatings
  • Non-solvent based & free from Volatile Organic Compounds (VOCs)
  • High solids content, 27% organic, 51% inorganic

Directions for use:

  • Wash and dry the vehicle.
  • Polish to remove any paintwork blemishes prior to sealing.
  • Wipe-down with a residue remover.
  • Optimum application conditions: 15-25 °C, Humidity 40-70%.
  • Using a dropper or pipette, apply a few straight lines of ISM 3.0 onto your applicator cloth.
  • Starting with horizontal surfaces first, apply ISM 3.0 in straight lines only (no cross-hatch, no circular application) and slightly overlap from one line to the next. Work in small areas at a time (approx. 24" square).
  • Immediately start your removal process otherwise the coating will become difficult to remove and may leave a smeary finish. If this happens, apply more product on top of the affected area and immediately remove.
  • Using two different microfibres, MF1 for the initial wipe, and MF6 for the second wipe.
  • Thoroughly wipe down the section to remove the residue. Your first wipe should remove 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
  • Multiple coats are not necessary.
  • Infrared (IR) curing? set lamps at 70-75 °C for 10-15 minutes per panel.
  • Keep dry for a minimum of 24 hours and do not wash the vehicle for 7 days.
  • Maintain using Kamikaze Collection Over Coat for additional gloss & hydrophobicity.

Technical Specification:

  • VOC-free
  • Non-solvent based
  • Non-flammable
  • Durability: 24-36 months
  • Water contact angle: 105 degrees
  • pH tolerance: 2-11
  • Thickness layer: 2 microns
  • Hardness: 3-4H (pencil scale)
  • Full curing time: 7 days
  • Coverage: 30ml = 1-2 cars

Size: 30ml


Material Safety Data Sheet (MSDS)

Customer Reviews

five stars 07 Jul 2023



Richard S
five stars 11 Jan 2023

Easy and straight

Easy and straight forward to apply. A little early to tell how well the product performs.

Simon Ferrari
five stars 16 Jul 2022

So easy

This lives up to the expectations, goes on super easy, great finish and easy to maintain. I want to apply another coat but it says not to so resisting the urge!

five stars 02 Jan 2020

One of the best Coatings on the market

ISM is one of the best Coatings on the market. Is it expensive? Yes! Is it worth it? Yes!

five stars 02 Jul 2018

Deep glossy glow

Applied some ISM on top of a coat of miyabi and the results are as good as advertised. The initial shine looks very satisfactory and if the protection lasts as long as stated then it will be great, the added benefit I have seen is that over the next few days after application the shine has gotten even better. Only used about a quarter of a bottle on a BMW 4 series which I was a bit worried about but everything has been covered. The application and removal process was very easy, the product is a bit thicker than miyabi but with two microfibre towels it still buffed off with ease. I did find after about half the car was done that it was best to switch to new microfibre cloths, it allowed for easier removal of the product.

Review this product

Share your thoughts with other customers

Write a Review